Settings When Using External Devices; Settings When Using Hdmi Output Devices - Sharp 60X50H Operation Manual

Settings when using external devices

Settings when using HDMI output devices

HDMI terminals can carry audio and visual signals to the TV with an HDMI certifi ed cable. When you want to output
the audio and picture from an HDMI output device on the TV, select "HDMI 1(ARC)", "HDMI 2", "HDMI 3" or "HDMI
4" by switching the input source.
nnecting an HDMI output device
Co
w HDMI (High-Definition Multimedia
Interface) Auto View
To watch an HDMI equipment image, select
1
"HDMI 1(ARC)", "HDMI 2", "HDMI 3" or "HDMI
4" using TV/VIDEO on the remote control unit
or on the TV.
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press b/c/d to select "Option".
4
Press a/b to select "Terminal setting", and
5
then press ENTER.
Press a/b to select "HDMI auto view", and
6
then press ENTER.
• The HDMI auto view can be selected only when
"HDMI 1(ARC)", "HDMI 2", "HDMI 3" or "HDMI 4"
is selected.
CH list
:Enter
60X50H_en_ID5.indd 57 60X50H_en_ID5.indd 57
Menu
Setup
:Back Option
Input skip
Input label
[ ]
HDMI auto view
[Enable]
HDMI cable
(commercially
HDMI output device
available)
Press a/b to select the desired item, and
7
then press ENTER.
Selected item
Set whether or not to use "Wide
Enable/Disable
mode" based on signal recognition,
including an HDMI signal.
NOTE
• Refer to your external equipment operation manual for the
above settings.
• When connecting a DVI-HDMI conversion adaptor/cable to
the HDMI terminal, the image may not come in clearly.
Description
57
2011-6-13 17:20:12 2011-6-13 17:20:12