Menu Language Settings; Switching Subtitle Languages; Digital Audio Language - Sharp 60X50H Operation Manual

Watching TV

Menu language settings

You can also select a language from setup menu.
Select from among 3 languages: English, Simplifi ed
Chinese and Traditional Chinese.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "View setting".
3
Press a/b to select "Language", and then
4
press ENTER.
Press a/b to select the desired language listed
5
on the screen, and then press ENTER.

Switching subtitle languages

Each time you press [ (Subtitle) on the remote
control, the subtitle switches when the broadcast
contains subtitle information.
Set "For hearing impaired" to "Yes"
(For hearing impaired)
Off
• • • • • • • •
Set "For hearing impaired" to "No"
1st language
Off
• • • • (For hearing impaired)
w Selecting the Language
Set up two preferred subtitle languages to display if the
subtitle languages are available.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "View setting".
3
Press a/b to select "Individual setting" and
4
then press ENTER.
Press a/b to select "Subtitle", and then press
5
ENTER.
Press a/b to select "1st language" or "2nd
6
language", and then press ENTER.
Press a/b to select the desired language,
7
and then press ENTER.
60X50H_en_ID5.indd 29 60X50H_en_ID5.indd 29
• If subtitles for the selected language are not included in a received
• Subtitles may not be displayed properly in 3D mode.
w Displaying subtitles for the hearing
If the broadcast includes subtitles for the hearing
impaired, they will take precedence over other
subtitles.
1st language
2nd language
• If the broadcast includes no subtitles for the hearing impaired, they
• Subtitles may not be displayed properly in 3D mode.

Digital audio language

2nd language
Set up to three preferred multi audio languages to
display if the audio languages are available.
• This function depends on audio language information from
• If audio for the selected language is not included in a received
NOTE
broadcast, subtitles will not be shown for that language.
impaired
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "View setting".
3
Press a/b to select "Individual setting" and
4
then press ENTER.
Press a/b to select "Subtitle", and then press
5
ENTER.
Press a/b to select "For hearing impaired".
6
Press c/d to select "Yes".
7
NOTE
will be not displayed even when set to "Yes".
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "View setting".
3
Press a/b to select "Individual setting", and
4
then press ENTER.
Press a/b to select "Digital audio language",
5
and then press ENTER.
Press a/b to select "1st language", "2nd
6
language" or "3rd language", and then press
ENTER.
Press a/b to select the desired language,
7
and then press ENTER.
NOTE
broadcasters.
broadcast, audio will not be output for that language.
29
2011-6-13 17:20:00 2011-6-13 17:20:00