Useful Viewing Functions; Freezing The Image; Returning To The Previously Selected Channel; Muting The Audio Temporarily - Sharp 60X50H Operation Manual

Watching TV

Useful viewing functions

Freezing the image

Allows you to capture and freeze one frame from a
moving image that you are watching.
3D 3D
Press FREEZE.
1
• Captures one frame from a moving image.
Press FREEZE again to cancel the function.
2
Using Freeze on the menu screen
Press c/d to select "Setup".
1
Press b/c/d to select "Option".
2
Press a/b to select "Option for view", and
3
then press ENTER.
Press a/b to select "Freeze", and then press
4
ENTER.
NOTE
• The still image automatically goes out after 30 minutes.

Returning to the previously selected channel

Press A to switch the currently tuned channel to the
previously tuned channel.
Press A again to switch back to the currently tuned
channel.
Press A to toggle between the currently selected
input source and the previously selected one.

Muting the audio temporarily

Using Mute ( ) on the remote control unit
mutes the current sound output.
Press Mute.
1
• The sound is silenced.
• " " is displayed while the mute function is on.
28
60X50H_en_ID5.indd 28 60X50H_en_ID5.indd 28
EFFECT BOOST SURROUND EFFECT BOOST SURROUND
Mute
Press Mute again within 30 minutes to cancel
2
the mute.
• Before 30 minutes, the volume level returns to the
previous setting.
NOTE
• Mute will be cancelled after 30 minutes. However,
the TV will not suddenly output loud sound as the
volume level will be set to 0 automatically. Increase
the volume level by pressing VOLk.

Outputting only audio

When listening to music from a music programme, you
can set the display off and enjoy audio only.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "ECO".
3
Press a/b to select "Audio only", and then
4
press ENTER.
Press a/b to select "On", and then press
5
ENTER.
Selected item
On Audio is output without screen image.
Off Both picture and audio are output.
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the "Audio only"
function is set to "Off".

Quick start

You can reduce the TV's start-up time after turning on
the power with the remote control unit.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "View setting".
3
Press a/b to select "Quick start", and then
4
press ENTER.
Press a/b to select "On", and then press
5
ENTER.
Selected item
On The TV quickly starts up from standby,
approximately 21 W of power consumption
is required during standby.
Off Power consumption is small during
standby.
Description
Description
2011-6-13 17:20:00 2011-6-13 17:20:00