3D Contents; Specifi Cations - 3D Glasses - Sharp 60X50H Operation Manual

Enjoying 3D image viewing
w 3D still image effect adjustment
You can adjust the 3D still image effect (depth).
Adjust the level from f5 to e10. "0" is the level where
no adjustment is made (factory preset value).
NOTE
• This function can be adjusted when viewing 3D still images
in USB mode.
• If you experience discomfort while viewing 3D images,
immediately discontinue viewing.
w Viewing time info
This function allows you to display the elapsed time of
3D image viewing on the screen.
Selected item
The elapsed time is displayed in
Yes one-hour increments after you start
watching 3D images.
No Hide the time.
w 3D test
This function displays 3D images for testing the 3D
operation. Clicking "Start" on the screen plays back 3D
test images.
NOTE
• If you press EXIT during playback, the previous screen will
be displayed.
w 3D glasses control
To enable this function, set the location of the TV to
"STORE". (See page 20.) Selecting "Yes" prevents the
3D glasses from receiving 3D signals from other TVs.

3D contents

You can enjoy a short 3D content built-into the TV without a
3D disc.
Go to "Menu" s "Setup" s "Option" s "3D contents".
The 3D content displays on the screen.
Changed to 3D mode.
Put on 3D glasses and press the power button on the glasses.
If you are in bad physical conditions or feel uncomfortable
watching 3D picture please stop watching TV.
This 3D contents will stop in 5 minutes.
:Exit
NOTE
• This content is a short segment several dozen seconds
long that plays back repeatedly.
• Playback stops automatically after 5 minutes.
• At intervals of about 30 seconds the screen becomes
dark. This is due to the repeated playback and is not a
malfunction.
• You cannot start 3D content when using USB applications.
• If you press EXIT during playback, the 3D content ends
and returns to the input source you viewed last.
56
60X50H_en_ID5.indd 56 60X50H_en_ID5.indd 56
Description
3D
Specifi cations – 3D glasses
Product 3D glasses
Model number AN-3DG20
Lens type Liquid crystal shutter
DC5V (supplied by a USB terminal
Power supply
of a SHARP TV)
Lithium ion polymer rechargeable
Battery
battery (DC3.7V 70mAh)
Usage time after each Approx. 30 hours of continuous
1
recharge* use
Charging time Approx. 90 minutes
Dimension (W x H x D) 175.5 × 43.0 × 173.0 mm
Approx.40.0 g (including the
Weight lithium ion polymer rechargeable
battery)
10°C to 40°C (The 3D Glasses
cannot operate fully at extreme
Operating temperature high or low temperatures. Please
use them within the specifi ed
usage temperature range)
1
* Usage time after each recharge: A rechargeable battery
becomes depleted from repetitive usage, and the battery
life gradually becomes shorter (the battery life varies with
your usage environment). The above is the value at the
factory default state and quality is not guaranteed by the
value.
2011-6-13 17:20:12 2011-6-13 17:20:12