Operating An Aquos Link Device; Recorder Power On/Off; Playback Of Titles Using Aquos Link; Setup Menu - Sharp 60X50H Operation Manual

AQUOS LINK

Operating an AQUOS LINK device

AQUOS LINK allows you to operate the HDMI-
connected device with one remote control.
Use the following procedures to start playback.
Press I to start playback of a title.
1
• See this page, section "Playback of titles using
AQUOS LINK" if you want to start playback using
the list of the titles of the AQUOS BD player.
Press J to fast forward.
2
Press G to reverse.
Press H to stop.
Press F to pause.
Press SOURCE a to turn the HDMI-
connected device on/off.
Use the following procedures to start recording.
Check the following items before recording.
• Make sure the antenna cable is connected properly.
• Check if the recording media (HDD, DVD, etc.) has enough
capacity for recording a programme.
• Select the equipment for recording in Selecting Recorder.
After you selected recording media (HDD,
1
DVD, etc.) in the menu, please make sure the
recording menu in the ready condition.
Press E to record a programme.
2
Press H to stop recording.
3

Recorder power on/off

This function is for turning of the CEC-compatible
recorder on/off.
Press MENU and the MENU screen displays.
1
Press c/d to select "Link operation".
2
Press a/b to select "Recorder power on/off",
3
and then press ENTER.
Every time you press ENTER in "Recorder
4
power on/off" , the CEC-compatible recorder
will be turned on/off.
64
60X50H_en_ID5.indd 64 60X50H_en_ID5.indd 64

Playback of titles using AQUOS LINK

This section explains how to play back a title in the
AQUOS BD player.
Power on the AQUOS BD player and select
1
the appropriate external input.
Press MENU and the MENU screen displays.
2
Press c/d to select "Link operation".
3
Press a/b to select "Top menu/title list", and
4
then press ENTER.
Link operation
Recorder power on/off
Top menu/title list

Setup menu

Media change
Recorder EPG
Change audio output device
[By AQUOS audio SP]
Sound mode change
Model select
AQUOS LINK setup
• The linked recorder now powers on and the TV
automatically selects the appropriate external
input source.
• The title list data from the connected AQUOS BD
player displays.
Select the title with a/b/c/d, and then
5
press I to start playback.
Setup menu
You can call up the menu of an HDMI CEC-compatible
external device (player, recorder, decoder, etc.) using the
"Setup menu" function.
Press MENU and the MENU screen displays.
1
Press c/d to select "Link operation".
2
Press a/b to select "Setup menu", and then
3
press ENTER.
NOTE
• If a connected device does not have this function or the device is in
a status where the menu cannot be displayed (recording, entering
standby, etc.), this function may not be available.
2011-6-13 17:20:15 2011-6-13 17:20:15