Timer Setting Using Epg; Cancelling The Timer Setting; Switching Subtitle Languages; Text - Sharp 60X50H Operation Manual

Watching TV

Timer setting using EPG

You can select TV programmes using data from the EPG.
Press EPG.
1
• You can also enable this function from "Menu" ->
"EPG " -> "EPG".
Press a/b/c/d to select the programme
2
you want to set, and then press ENTER.
Press c/d to select the timer setting, and
3
then press ENTER.
• If you select "No", the TV returns to the EPG
screen.
Watch
w Selecting "Watch" in the timer setup
screen
This setting allows you to switch to a programme at a
set time.
1 Press c/d to select "Watch", and then press
ENTER.
2 Press c/d to select "Yes", and then press
ENTER.
3 Press ENTER to set time.
• The selected TV programme is marked with an icon.
48
60X50H_en_ID5.indd 48 60X50H_en_ID5.indd 48

Cancelling the timer setting

Press EPG.
1
• You can also enable this function from "Menu" ->
Press a/b/c/d to select the programme on
2
timer setup, and then press ENTER.
Press c/d to select "Cancel", and then press
3
ENTER.
Press c/d to select "Yes", and then press
4
ENTER.
Press ENTER to cancel timer setup.
5
w Cancelling using B button on the remote
control
No
Press EPG.
1
Press B to display the timer list screen.
2
Press a/b to select a programme you want
3
to change, and then press ENTER.
Press c/d to select "Cancel", and then press
4
ENTER.
Press c / d to select "Yes", and then press
5
ENTER.

Switching subtitle languages

Each time you press
subtitle switches.
NOTE
• When there is no subtitle broadcast, "No subtitle Data" will
be displayed.
• The number of subtitle languages available differs
depending on the programme.

Text

MHEG-5 data broadcast is scheduled in Hong Kong.
You can watch a MHEG-5 data broadcast after
pressing the TEXT button.
NOTE
• MHEG-5 may not be displayed in 3D mode.
"EPG " -> "EPG" .
[ on the remote control, the
2011-6-13 17:20:08 2011-6-13 17:20:08