Turning The Tv On/Off; Turning On/Off The Power; Standby Mode; Supplying Electric Power To The Antenna - Sharp 60X50H Operation Manual

Preparation

Turning the TV on/off

POWER
button

Turning on/off the power

• To turn on the power
Press POWER on the TV. (After several seconds, an
image appears with sound.)
NOTE
• Wait more than fi ve seconds until you press POWER on
the TV after inserting the power plug.
• To turn off the power
Switch it off by pressing POWER on the TV.

Standby mode

• To standby mode
If the TV is switched on, you can switch it to standby
by pressing POWER on the remote control.
• Switching on from standby
From standby, press POWER on the remote control.
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby
mode.
60X50H_en_ID5.indd 19 60X50H_en_ID5.indd 19
Supplying electric power to the
antenna
POWER button
When you set-up the D-TV antenna for the fi rst time,
or connect the antenna to a community antenna, you
need to proceed to set the antenna by following this
manual.
1
2
3
4
5
6
7
8
Selected item
On
Off
Press D-TV to access D-TV mode.
Press MENU and the MENU screen displays.
Press c/d to select "Setup".
Press b/c/d to select "View setting".
Press a/b to select "Channel settings" and
then press ENTER.
Press a/b to select "Antenna setup-DIGITAL"
and then press ENTER.
Press a/b to select "Supply voltage" and
then press ENTER.
Press c/d to select "On" and then press
ENTER.
Description
Select "On" when your antenna is set-up
and connected independently.
Typical supply voltage: 5V
Typical supply current: 50mA
Select "Off" when you do not need to
supply voltage to your antenna, i.e.
when your antenna is connected to a
community antenna. (The factory default
setting of this function is "Off".)
TEXT TEXT
19
2011-6-13 17:19:55 2011-6-13 17:19:55