A-Tv (Analogue Tv)/D-Tv (Digital Tv) Buttons - Sharp 60X50H Operation Manual

Watching TV

A-TV (Analogue TV)/D-TV (Digital TV) buttons

Use the following buttons on the remote control to
operate the menu.
3D 3D
A-TV (Analogue TV): Press to switch to analogue TV
mode. After switching from digital TV or external input
mode to analogue TV mode, the TV jumps to the most
recently viewed analogue channel.
D-TV (Digital TV): Press to switch to digital TV
mode. After switching from analogue TV or external
input mode to digital TV mode, the TV jumps to the
most recently viewed digital TV channel.
60X50H_en_ID5.indd 43 60X50H_en_ID5.indd 43
EFFECT BOOST SURROUND EFFECT BOOST SURROUND
TEXT TEXT
When you watch the TV for the fi rst time
When the TV powers on for the fi rst time after
purchase, perform the auto installation.
A-TV (Analogue TV)
You can run the auto installation to set channels
automatically.
To watch the analogue TV, select "Auto
1
installation" from "Setup" menu. (See page 22.)
After setting the channels, you can select a
2
channel using CH r / s or 0-9 on the remote
control unit. (See page 23.)
D-TV (Digital TV)
You can run the auto installation to set channels
automatically.
To watch D-TV broadcasts, select "Digital
1
Search" from "Auto installation" menu. (See
page 20.)
After setting the channels, you can select a
2
channel using CH r / s or 0-9 on the remote
control unit. (See page 23.)
43
2011-6-13 17:20:07 2011-6-13 17:20:07