Sharp LC-80LE642U Service Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. LCD TV
  5. Aquos LC-80LE642U
  6. Service manual

Sharp LC-80LE642U Service Manual

Hide thumbs Also See for LC-80LE642U:
Table of Contents

Advertisement

Quick Links

See also: Operating Manual , Setup Manual
TopPage
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-
inal condition and only parts identical to those specified should be used.
CAUTION ............................................... . ............i
MAJOR SERVICE PARTS ..................... . ..........iv
[1]
SPECIFICATIONS ................................. . ....... 1-1
[1]
OPERATION MANUAL .......................... . ....... 2-1
[1]
DIMENSIONS ........................................ . ....... 3-1
[1]
REMOVING OF MAJOR PARTS ........... . ....... 4-1
[2]
sheet ...................................................... . ....... 4-9
[3]
Precautions for assembly....................... . ..... 4-10
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.

SERVICE MANUAL

LCD COLOR TELEVISION
MODEL
CONTENTS
CHAPTER 5. ADJUSTMENT
[1]
ADJUSTMENT PROCEDURE ......................5-1
[2]
[1]
[2]
error (Center icon LED used) ........................6-1
[3]
TROUBLESHOOTING TABLE ......................6-4
[1]
MAJOR IC INFORMATIONS .........................7-1
CHAPTER 8. OVERALL WIRING/SYSTEM BLOCK
DIAGRAM
[1]
OVERALL WIRING DIAGRAM ......................8-1
[2]
SYSTEM BLOCK DIAGRAM .........................8-2
No. S73B9LC80LE64
LC-80LE642U
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
LC-80LE642U
........6-1

Advertisement

Table of Contents
loading

Related Manuals for Sharp LC-80LE642U

Summary of Contents for Sharp LC-80LE642U

  • Page 1: Table Of Contents

    TopPage LC-80LE642U SERVICE MANUAL No. S73B9LC80LE64 LCD COLOR TELEVISION LC-80LE642U MODEL In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig- inal condition and only parts identical to those specified should be used.

  • Page 2: Safety Precaution

    LC-80LE642U SAFETY PRECAUTION Service Manual IMPORTANT SERVICE SAFETY PRECAUTION Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the servicing guidelines which follow: WARNING • Using two clip leads, connect a 1.5k ohm, 10 watt resistor paral- leled by a 0.15µF capacitor in series with all exposed metal cabinet...

  • Page 3: Precautions A Prendre Lors De La Reparation

    LC-80LE642U PRECAUTIONS A PRENDRE LORS DE LA REPARATION Ne peut effectuer la réparation qu' un technicien spécialisé qui s'est parfaitement accoutumé à toute vérification de sécurité et aux conseils suivants. • A l'aide de deux fils à pinces, brancher une résistance de 1.5 kΩ...

  • Page 4: Precautions For Using Lead-Free Solder

    LC-80LE642U PRECAUTIONS FOR USING LEAD-FREE SOLDER Employing lead-free solder • “PWBs” of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder.

  • Page 5: Outline

    LC-80LE642U OUTLINE Service Manual MAJOR SERVICE PARTS PWB Unit Ref NO. PARTS CODE DESCRIPTION DKEYMF953FM06 MAIN Unit DUNTKF975FM18 LCD CONTROL Unit DUNTKF494FM01 R/C OPC Unit DUNTKF770FM02 ICON Unit DUNTKF800FM53 KEY Unit RUNTKA936WJQZ Wi-Fi Unit RUNTKB096WJQZ POWER/DRIVE Unit NOTE: *1 Replace MAIN PWB Unit (DKEYMF953FM06) in case of IC3103 and IC3104 failure.

  • Page 6: Chapter 1. Specifications Specifications

    LC-80LE642U CHAPTER 1. SPECIFICATIONS Service Manual [1] SPECIFICATIONS 1 – 1...

  • Page 7: Chapter 2. Operation Manual Operation Manual

    LC-80LE642U CHAPTER 2. OPERATION MANUAL Service Manual [1] OPERATION MANUAL 2 – 1...
  • Page 8 LC-80LE642U 2 – 2...
  • Page 9 LC-80LE642U 2 – 3...
  • Page 10 LC-80LE642U 2 – 4...

  • Page 11: Chapter 3. Dimensions Dimensions

    LC-80LE642U CHAPTER 3. DIMENSIONS Service Manual [1] DIMENSIONS 3 – 1...

  • Page 12: Chapter 4. Removing Of Major Parts

    LC-80LE642U CHAPTER 4. REMOVING OF MAJOR PARTS Service Manual [1] REMOVING OF MAJOR PARTS 1. Removing of Stand Unit and Rear Cabinet Assy. 1. Remove the 4 lock screws and detach the Stand Unit 2. Disconnect AC wire and detach the AC cord.
  • Page 13 LC-80LE642U [How to remove Rear Cabinet Assy] * Please do following works by 2 persons → → → Do following works as 1) Please grasp the swelling of a speaker and pull back with pushing down. Remove one hook under an operation.
  • Page 14 LC-80LE642U 3) Hold left side of TV set by one hand, and put the other hand between bottom cover and Rear Cabinet Assy. And pull Rear Cabinet Assy. Remove all-left hand side hook. 4) Two persons stand on the both sides of TV SET, and have a Front Cabinet Assy and a Rear Cabinet Assy by each hand.

  • Page 15: Precautions For Assembly

    LC-80LE642U [Precautions for assembly] Push Push Push CAUTION Set it so that there may not be a clearance between Front Cabinet Assy and Rear Cabinet Assy. Push Push The fingernail is surely fixed when Rear cabinet Assy is There is a gap without the fingernail fitting firmly pushed, and the gap disappears.

  • Page 16: Main Unit

    LC-80LE642U 2. Removing of Speaker (L/R) and KEY Unit. 1. Disconnect the SP wire. 2. Remove the 2 lock screws and detach the Speaker (L) , Speaker (R) 3. Disconnect the RC wire. 4. Detach the KEY Unit Assy 5. Disconnect the KM wire.
  • Page 17 LC-80LE642U 3. Removing of Connectors, 80” LCD Panel Module Unit Assy. 1. Disconnect the following connectors from the MAIN Unit. (LV, PD, UB) 2. Disconnect the following connectors from the POWER/DRIVE Unit. (L1, L2, PD) 3. Disconnect the following connectors from the LCD Control Unit. (PL, LW) 4.
  • Page 18 LC-80LE642U 4. Removing of LCD CONTROL Unit, MAIN Unit, POWER/DRIVE Unit. 1. Remove the 2 Connecting Cords , 2 Ferrite Cores , 6 lock screws and detach the LCD CONTROL Unit 2. Remove the 2 lock screws and detach the Terminal Angle (Side) 3.

  • Page 19: Front Cabinet Assy

    LC-80LE642U 5. Removing of R/C OPC Unit, ICON Unit, Wi-Fi Unit. 1. Detach the R/C OPC Unit 2. Disconnect the RC wire. 3. Detach the ICON Unit 4. Disconnect the CI wire. 5. Detach the Wi-Fi Unit 6. Disconnect the UB wire.

  • Page 20: The Location Putting On The Heat Measure Sheet

    LC-80LE642U [2] The location putting on the heat measure sheet 1. MAIN PWB Unit PSPAZC871WJKZ MAIN-CPU COOL(B) 4 – 9...

  • Page 21: Precautions For Assembly

    LC-80LE642U [3] Precautions for assembly 1. Points to be checked and precautions when servicing the unit Mount the main PWB Assy on the backlight chassis and check that the EMI-prevention parts are not peeled and twisted from the access holes. (The EMI-prevention parts, conductive nonwoven fabric gaskets, must be seen from the access holes.)
  • Page 22 LC-80LE642U The following is a drawing mounting the main PWB Assy on the backlight chassis. (The parts indicated by -> are the access holes for confirmation.) (Main PWB Assy => State where the shielded case and RF terminal angle are mounted on the main PWB)
  • Page 23 LC-80LE642U CHAPTER 5. ADJUSTMENT Service Manual [1] ADJUSTMENT PROCEDURE The adjustment values are set to the optimum conditions at the factory before shipping. If a value should become improper or an adjustment is required due to part replacement, make an adjustment according to the following procedure.
  • Page 24 LC-80LE642U 2.2.3 How to upgrade the software 1. Unplug the AC cord. 2. Insert the USB Memory for version upgrade into the service socket. 3. Plug in the AC cord with power button pressed down. 4. After 5 seconds, unpress the power button.
  • Page 25 LC-80LE642U 2.3. Monitor microprocessor software version upgrade Create the USB memory for monitor microprocessor software version upgrade in the same manner as explained in the “Main software version upgrade”. Copy the file OKLA_LE857_xxx.USB and OKLAMxxx.SMB. (named temporarily) for monitor microprocessor software version upgrade to the USB memory.
  • Page 26 LC-80LE642U 3. Entering and exiting the adjustment process mode 1) Before entering the adjustment process mode, the AV position RESET in the video adjustment menu. 2) While holding down the “VOL (–)” and “INPUT” keys at a time, plug in the AC cord of the main unit to turn on the power.
  • Page 27 LC-80LE642U 5. List of adjustment process mode menu The character string in brackets [ ] will appear as a page title in the adjustment process menu header. Page Line Item Description Remarks (adjustment detail, etc.) MAIN Version Main software version...
  • Page 28 LC-80LE642U Page Line Item Description Remarks (adjustment detail, etc.) ANALOG RGB ADJ Analog RGB picture level adjustment R A_GAIN G A_GAIN B A_GAIN R OFFSET G OFFSET B OFFSET RGB_A_CLAMP VCOM ADJ VCOM adjustment value LEV1 Standard value 1 Adjustment gradation setting.
  • Page 29 LC-80LE642U Page Line Item Description Remarks (adjustment detail, etc.) MODE SELECT POS SELECT POS MIN POS MID1 POS MID2 POS MID3 POS MID4 POS MID5 POS MID6 POS MAX CD MIN CD MID1 CD MID2 CD MID3 CD MID4 CD MID5...
  • Page 30 Writing setting values to EEPROM EEP RECOVER Reading setting values from EEPROM MODEL NAME PANEL SIZE SETTING FOR ADJ VERUP FLAG ENABLE SHARP RC ENABLE PANEL LIMIT PANEL RANGE LIMIT SHORT CHECK MODE SHORT CHECK CURRENT CURRENT SW TEST NETWORK UPDATE...
  • Page 31 LC-80LE642U *1 Details of P1.12 (NORMAL STANDBY CAUSE) When TV set is powered off due to normal use or product specification, the last cause will be recorded. The code, character string and description for the standby cause are below. If you power off by remote, the cause will not be recorded.

  • Page 32: Adjustment Procedure

    (Avoid the luminance change by active-back light) [Adjustment position] 8.2. Image adjustment 8.2.1 Device check Conform Device is set for SHARP LCD US, before start the Adjustment. Confirm Signal Generator setting (Set to regulation level) • Composite signal: 0.714Vp-p ± 0.02Vp-p (Pedestal to white) •...
  • Page 33 LC-80LE642U 8.2.2 Factory Mode Adjustment point Adjustment conditions Adjustment procedure Factory Mode Shift to Adjustment mode by Special R/C code. 8.2.3 Composite N358 signal/tuner adjustment Adjustment point Adjustment conditions Adjustment procedure Setting N358 signal • Input N358 color bar (color saturation 75%) signal to composite input.

  • Page 34: White Balance Adjustment

    LC-80LE642U 9. White balance adjustment 9.1. White balance adjustment (For details about the adjustment procedure, refer to “Kameyama Model Integrated Monitor WB Adjustment Specification V1.92”.) Adjustment Adjustment conditions Adjustment procedure point Setting 1) Change set condition as the below. AV MODE: [DYNAMIC]...
  • Page 35 Monochro: ON Active Backlight: OFF Writing Aging Time: Min. 60 minutes MSET0003 After White Balance Adjustment Luminance Spec. LC-80LE642U:Min 280cd/m2 10. Date Writing of KEY 10.1. EDID data (HDMI analog RGB)(Main Unit: DKEYMF953FM06) Adjustment point Adjustment conditions Adjustment procedure EDID data Adjustment Mode Check 1.

  • Page 36: Software Version

    LC-80LE642U 11. Factory setting For finish the Initialize process, needed to pull out AC cord, After Factory Initialize. CAUTION: After Factory Initialize, Do not turn on again. When you turn on TV, please do Factory Initialize again. Adjustment point Adjustment conditions...

  • Page 37: Public Mode Setting Procedure

    LC-80LE642U [2] PUBLIC MODE SETTING PROCEDURE 1. How to start Public Mode • There are the following two ways to get the public mode setup screen displayed. In the adjustment process mode, turn on “PUBLIC MODE”. Also press the “CH ( )”...
  • Page 38 LC-80LE642U 4. Public Mode Menu The guidance is not displayed on screen. Setup procedure • To move the cursor up and down, use the “cursor UP/DOWN” key (remote controller) and “CH ( )” key (remote controller and set). • To change the settings, use the “cursor RIGHT/LEFT” key (remote controller) and “VOL (+)/(–)” key (remote controller and set).
  • Page 39 LC-80LE642U [How to use USB clone] This is the function that copying the one TV's user setting to other TVs or copying previous user setting to itself.(Only same series.) 1. Insert the USB memory to TV. 2. Insert AC code of TV with pushing the “INPUT” and “Vol+” keys which are on the tact key.
  • Page 40 LC-80LE642U 10.The following guide is dispalyed.Then select the “USB→TV [Start]”. 11.Follow guide is displayed when it is finished , then select "Reset" . TV will restart. 12.Comfirm the user setting is copied. 5 – 18...
  • Page 41 LC-80LE642U 5. On Setting Items * “EZ-SETUP” discussed below indicates “EZ-SETUP after the first power-on”. 1) POWER ON FIXED Selection Selection between “Variable” and “Fixed” (loop provided) Default – (Variable) Explanation In “Fixed” setting, the power-off by the power key of the unit is invalidated and the image is kept being received. The power can be turned off by stopping the power supply from AC.
  • Page 42 LC-80LE642U 6) PANEL BUTTON Selection Selection between “Respond” and “No respond” (loop provided) Default Respond Explanation All the operations by keys (except the power key) of the unit can be invalidated. Limit in Setting • Adjustment process, inspection mode and hotel menu mode can be started irrespective of setting.
  • Page 43 LC-80LE642U 10)INPUT MODE FIXED Selection Selection between “Variable”, “Fixed”, “ACON (AC CTRL)” and “AC/RCON (AC/RC CTRL)” (loop provided) Default – (Variable) • At the “Fixed” setting, the TV set gets started with the settings of “Input mode start”, and then any other channels and inputs Explanation are not accepted.
  • Page 44 LC-80LE642U 15)PUBLIC MODE (ON/OFF) Selection Selection between “ON” and “OFF” (loop provided) Default Explanation In case of “ON”, public mode settings are effected. Limit in Setting None Exception None Remarks The public-mode settings are operable only when this item is set at ON.

  • Page 45: Chapter 6. Troubleshooting Table

    LC-80LE642U CHAPTER 6. TROUBLESHOOTING TABLE Service Manual [1] Failure diagnosis by LED in front of cabinet START Is the Center Icon flashing? Check "[2] LED flashing specification at the time of an error (Center icon LED used)". Is the Center Icon lighting Check Power-Unit and AC-cable.
  • Page 46 LC-80LE642U 3. New method LED flashing timing chart at the time of an error 100ms 400ms 1.6sec 1) Inverter/Lamp failure details (Flashes slowly once and flashes fast) Note Pins are monitor microcomputer pins unless other- Error type Center icon LED operation wise specified.
  • Page 47 LC-80LE642U 3) Communication failure details (Flashes slowly 3 times and flashes fast) Note Basically, debug print logs are analyzed or commu- Error type Center icon LED operation nication logs are analyzed by a bus monitor. Initial communica- H: On Initial communication from the main CPU is not tion reception failure received.

  • Page 48: Troubleshooting Table

    LC-80LE642U [3] TROUBLESHOOTING TABLE • LED Backlight does not turn on. If it is not an error of power supply/LED driver, It is start-up in the lamp error disregard mode. Do you start? When main unit is replaced, does it start normally? Replace main unit.
  • Page 49 LC-80LE642U Trouble Shooting Panel Module When C-S FPC is replaced, does screen display normally? Replace C-S FPC. When C-PWB is replaced, does screen display normally? Replace C-PWB. (Adjust “VCOM ADJ” after replace C-PWB) Replace Panel HIRAKI. (Adjust “VCOM ADJ” after replace Panel HIRAKI) If Panel Hiraki is changed, Mura adjustment is needed as well.
  • Page 50 LC-80LE642U • Picture does not display. Trouble Shooting LCD controller board(C-PWB) A screen isn't displayed. • It is checked whether PL/LW is connected correctly. (The LED Backlight has shone at start-up) • Replace another C-PWB. Please enter the adjustment process mode and display “LCD TEST It isn't the fault of a C-PWB.
  • Page 51 LC-80LE642U <HDMI input> No video (1)-1 HDMI: No external input video [INPUT-1] Is INPUT-1 selected on the input select menu screen? Select INPUT-1 on the input select menu screen for the right input signal. Does the HOT PLUG detection function? Check the line between the pin(18) of SC1501 and the pin(60) of IC2601.
  • Page 52 LC-80LE642U <HDMI input> No video (1)-2 HDMI: No external input video [INPUT-2] Is INPUT-2 selected on the input select menu screen? Select INPUT-2 on the input select menu screen for the right input signal. Does the HOT PLUG detection function? Check the line between the pin(18) of SC1502 and the pin(75) of IC2601.
  • Page 53 LC-80LE642U <HDMI input> No video (1)-3 HDMI: No external input video [INPUT-3] Is INPUT-3 selected on the input select menu screen? Select INPUT-3 on the input select menu screen for the right input signal. Does the HOT PLUG detection function? Check the line between the pin(18) of SC1503 and the pin(56) of IC2601.
  • Page 54 LC-80LE642U <HDMI input> No video (1)-4 HDMI: No external input video [INPUT-4] Is INPUT-4 selected on the input select menu screen? Select INPUT-4 on the input select menu screen for the right input signal. Does the HOT PLUG detection function? Check the line between the pin(18) of SC1504 and the pin(51) of IC2601.
  • Page 55 LC-80LE642U No video (2) COMPONENT: No external input video [INPUT-5] Is INPUT-5 selected on the input select menu screen? Is the INPUT-SELECT for the input signal? Select INPUT-5 on the input select menu screen for the right input signal. Does the INPUT-5 COMP1_PLUG detection function? Check the line between pin (17) of input terminal (J510) and pin (B29) of IC3301 (CPU).
  • Page 56 LC-80LE642U No video (3) COMPOSITE: No external input video [INPUT-6] COMPOSITE: No external input video [INPUT-7] Is INPUT-6 selected on the input select menu screen? Is INPUT-7 selected on the input select menu screen? Select INPUT-6 on the input select menu Select INPUT-7 on the input select menu screen for the right input signal.
  • Page 57 LC-80LE642U No video (4) PC: No external input video [INPUT-8] Is INPUT-8 selected on the input select menu screen? Select INPUT-8 on the input select menu screen for the right input signal. Is IC2601 (HDMI-SW) accessed by I2C, with PC connected, to read the VGA_SCL/SDA data? Check the DDC-12C line and its peripheral circuits.
  • Page 58 LC-80LE642U No video (5) No video at UHF/VHF broadcast signal reception No video at digital broadcast signal reception Is the specified TV signal selected on the input select menu screen? Are there the IF signal at input pins(AT32/AU32)(TUN_IFN/P) Are there the IF signal at input pins(AT32/AU32)(TUN_IFN/P) of...
  • Page 59 LC-80LE642U No video (6) MHL:No external input video [INPUT-4] (using MHL Cable with Mobile Phone) Is INPUT-4 selected on the input select menu screen? Select INPUT-4 on the input select menu screen for the right input signal. Does the MHL Cable detection function? Check the MHL Cable.
  • Page 60 LC-80LE642U • Does not sound. No audio (1) INPUT-6 No audio. INPUT-7 No audio. INPUT-5 No audio. Is INPUT-6 selected on the input select Is INPUT-7 selected on the input select Is INPUT-5 selected on the input select menu screen?
  • Page 61 LC-80LE642U No audio (2) [PC analog audio input] INPUT-8 No audio. [HDMI analog audio input] INPUT-2 No audio. Is INPUT-8 selected on the input select menu screen? Is INPUT-2 selected on the input select menu screen? Refer to “: No external input video [INPUT-8]”.
  • Page 62 LC-80LE642U No audio (3) No audio at UHF/VHF broadcast signal reception. No audio at digital broadcast signal reception. Is TV selected on the input select menu screen? Is TV selected on the input select menu screen? Refer to “No video at UHF/VHF broadcast signal Refer to “No video at digital broadcast signal...
  • Page 63 LC-80LE642U No audio (4) INPUT-1 No audio (HDMI connected) INPUT-2 No audio (HDMI connected) INPUT-3 No audio (HDMI connected) INPUT-4 No audio (HDMI connected or MHL connected) [INPUT-1 input] Is INPUT-1 selected on the input select menu screen? [INPUT-2 input]...
  • Page 64 LC-80LE642U No audio signal at Digital Audio Output terminal (Analog sound heard) No INPUT-1/2/3/4 (HDMI) audio. No audio at digital broadcast signal reception. If no video appears, refer to “No external input video (HDMI) If no video appears, refer to “No video at digital broadcast signal [INPUT-1/2/3/4]”.
  • Page 65 LC-80LE642U No monitor audio output Is the audio output from the monitor set at “VARIABLE” or “FIXED” on the menu screen? Check IC3301 (CPU) and its peripheral circuits. Are there the audio signal outputs at pins (AN34) (HP_MONITOR_L) and (AN35) (HP_MONITOR_R) of IC3301 (CPU)? Check IC3301 (CPU) and its peripheral circuits.

  • Page 66: Chapter 7. Major Ic Informations

    LC-80LE642U CHAPTER 7. MAJOR IC INFORMATIONS Service Manual [1] MAJOR IC INFORMATIONS 1. MAJOR IC INFORMATIONS 1.1. IC2601 (VHiSii9387A-1Q) This IC is 5 input and 1 output HDMI port processor. The TMDS cores run at 2.25Gbps. (Supports video resolutions up to 1080p, 60Hz, 12bit.) The adaptive equalizer provides long cable support.
  • Page 67 LC-80LE642U 1.11. IC1702 (VHiAK4201EU-1Y) This IC is audio amplifier for line-out/head-phone. 1.12. IC1703 (VHiYSS952QZ-1Y) Audio DSP (YSS952QZ) has digital audio adjustment function (for example, PEQ, bass/treble, balance, bass enhancer, etc.) and adjusts TVs audio quality. 7 – 2...
  • Page 68 LC-80LE642U - MEMO - 7 – 3...

  • Page 69: Overall Wiring Diagram

    LC-80LE642U CHAPTER 8. OVERALL WIRING/SYSTEM BLOCK DIAGRAM Service Manual [1] OVERALL WIRING DIAGRAM OVERALL WIRING DIAGRAM DKEYMF953FM06 ICON Unit Wi-Fi Unit 8 – 1...

  • Page 70: System Block Diagram

    LC-80LE642U [2] SYSTEM BLOCK DIAGRAM SYSTEM BLOCK DIAGRAM 8 – 2...

  • Page 71: Parts Guide

    LC-80LE642U PartsGuide PARTS GUIDE No. S73B9LC80LE64 LCD COLOR TELEVISION LC-80LE642U MODEL CONTENTS PRINTED WIRING BOARD SUPPLIED ACCESSORIES/ ASSEMBLIES PACKING PARTS LCD PANEL MODULE UNIT SERVICE JIG (USE FOR SERVICING) CABINET AND MECHANICAL PARTS Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
  • Page 72 LC-80LE642U PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [1] PRINTED WIRING BOARD ASSEMBLIES MAIN Unit DKEYMF953FM06 LCD CONTROL Unit DUNTKF975FM18 R/C OPC Unit DUNTKF494FM01 ICON Unit DUNTKF770FM02 KEY Unit DUNTKF800FM53 RUNTKA936WJQZ Wi-Fi Unit POWER/DRIVE Unit RUNTKB096WJQZ [2] LCD PANEL MODULE UNIT 80"...
  • Page 73 LC-80LE642U [3] CABINET AND MECHANICAL PARTS Unit R/C OPC Unit Wi-Fi ICON Unit Unit 4-2 4-1 MAIN LCD CONTROL Unit Unit 80" LCD Panel Module Unit POWER/ DRIVE Unit...
  • Page 74 LC-80LE642U PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] CABINET AND MECHANICAL PARTS Front Cabinet Assy CCABAC818WJ39 Front Cabinet Not Available R/C OPC Cover Not Available Front Decoration HDECQB669WJ3A Wire Holder LHLDWA289WJKZ Diffusion Sheet Not Available Himeron, x2 PSPAHC173WJZZ...
  • Page 75 LC-80LE642U [4] SUPPLIED ACCESSORIES/PACKING PARTS...
  • Page 76 LC-80LE642U PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] SUPPLIED ACCESSORIES/PACKING PARTS Stand Base Assy CDAi-A806WJ36 Support Assy, x2 CANGKD276WJ04 Stand Screw Assy CSAKKA011WJ01 Enquete Card TCADEA290WJZZ Warranty Card Not Available Operation Manual TiNS-F954WJZZ Connection Guide TMAN-A050WJN1 AAA size Battery, x2...
  • Page 77 LC-80LE642U...
  • Page 78 LC-80LE642U COPYRIGHT © 2013 BY SHARP CORPORATION ALL RIGHTS RESERVED. No Part of this publication may be reproduced, stored in a retrieval system, or transmitted in any from or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

Table of Contents