Main Control Board (Full Electronic Specification Model (Rx256Dt7X1)); Electronic Control (Mid Electronic Specification Models (Rx256Dt4X1, Rx256Et2B1, Rx256Et2W1)) - Fisher & Paykel RX256DT4X1 FP Service Manual

11.1.4

Main Control Board (Full Electronic Specification Model (RX256DT7X1))

Located at the rear of the cabinet alongside the compressor.
11.1.5 Electronic Control (Mid Electronic Specification Models (RX256DT4X1,
RX256ET2B1, RX256ET2W1))
1. Remove the hex head screws holding the control to the cabinet.
2. Unplug the connectors from the cabinet harness and remove the control assembly.
3. Remove the cover of the board by squeezing the tabs on the cover to release the cover from the
assembly to expose the electronic control.
4. Unplug the wires from the electronic control board and unclip it from the control assembly.
Main Control Board
77
321023