8.1.4.9
Service Test 152 - Freezer Door State.
When selected, the refrigerator display will show the state of the freezer door.
• During this test, the freezer door switch must be closed. During these service mode tests, all
dispenser keypad LEDs should be off.
8.1.4.10
Service Test 161 - Cube Dispense Test.
This test is used to test the cubed ice function. When selected, the refrigerator display will show "Off"
when the actuator is not activated. When the actuator is pressed, the refrigerator display will show
"On". A service technician should evaluate proper operation of the auger motor with the actuator
activated.
REFRIGERATOR DOOR IS CLOSED
FREEZER DOOR IS OPEN
FREEZER DOOR IS CLOSED
ACTUATOR IS NOT ACTIVE
ACTUATOR IS ACTIVE
41
321023