Abs (Anti-Lock Brake System) Indicator Light - Sprint Gt Only; Ignition Key - Triumph Sprint ST Owner's Handbook Manual

ABS (Anti-Lock Brake System)
Indicator Light - Sprint GT only
The ABS indicator
illuminates to show that the ABS
function is
Illumination is normal after engine start-up,
and until the motorcycle first reaches a speed
exceeding 6 mph (10 km/h). Unless there is a
fault, it should not illuminate again until the
engine is restarted.
If the indicator light becomes illuminated at
any other time while riding it indicates that
the ABS has a malfunction that requires
investigation.
Warning
If the ABS is not functioning, the brake
system will continue to function as a
non-ABS braking system. Do not continue
to ride for longer than is necessary with the
indicator light illuminated. Contact an
authorized Triumph dealer as soon as
possible to have the fault checked and
rectified. In this situation, braking too hard
will cause the wheels to lock resulting in
loss of control and an accident.
See also Braking on page 57.
General Information

Ignition Key

light
not available.
ceom
1. Key number tag
2. Key blade for alarm system
In addition
lock/ignition switch, the ignition key is
required to operate the seat lock and fuel
tank cap.
When the motorcycle is delivered from the
factory, two ignition keys are supplied
together with a small tag bearing the key
number, and a spare key blade for use with
Triumph accessory alarm. Make a note of the
key number and store the spare key, key
blade and key number tag in a safe place
away from the motorcycle.
Your authorized Triumph dealer can supply a
replacement key cut from details of the key
number or can cut a new key using the
original as a master.
2
1
to operating the steering
31