Engine Management System Malfunction Indicator Light; Alarm Indicator Light - Triumph Sprint ST Owner's Handbook Manual

General Information
Engine Management System
Malfunction Indicator Light
The malfunction indicator light
for the engine management
system illuminates when the
ignition is switched on (to indicate that it is
working) but should not become illuminated
when the engine is running.
If the malfunction indicator light becomes
illuminated when the engine is running, this
indicates that a fault has occurred in one or
more of the systems controlled by the engine
management system. In such circumstances,
the engine management system will switch to
'limp-home' mode so that the journey may
be completed, if the fault is not so severe that
the engine will not run.
Warning
Reduce speed and do not continue to ride
for longer than is necessary with the
malfunction indicator light illuminated. The
fault may adversely affect
performance, exhaust emissions and fuel
consumption. Reduced
performance could cause a dangerous
riding condition, leading to loss of control
and an accident. Contact an authorized
Triumph dealer as soon as possible to have
the fault checked and rectified.
30
Note:
• If the malfunction indicator light
flashes
switched on, contact an authorized
Triumph dealer as soon as possible
to have the situation rectified. In
these circumstances the engine
will not start.

Alarm Indicator Light

The alarm light will illuminate
when the conditions described
in
instructions are met.
The light does not function unless an alarm is
fitted.
engine
engine
when the ignition is
the accessory alarm