Helmet Hooks - Sprint Gt; Triumph Accessory D-Lock Storage - Sprint Gt Models Only - Triumph Sprint ST Owner's Handbook Manual

Helmet Hooks - Sprint GT

Two helmets can be secured to the
motorcycle using the helmet hooks beneath
the seat.
1
cgdr
1. Helmet hooks (right hand shown)
To attach a helmet to the motorcycle, remove
the seat and loop the helmet chin strap over
the hook. To secure the helmet, re-fit the seat
and lock into position.
Warning
Never ride the motorcycle with helmet(s)
secured to the helmet hooks. Riding the
motorcycle with helmet(s) secured to the
helmet hooks may cause the motorcycle to
become unstable leading to loss of control
and an accident.
Caution
Do not allow helmets to rest against a hot
muffler. The helmet may be damaged.
General Information
Triumph Accessory D-lock
Storage - Sprint GT models
only
Space is provided under the seat to store a
Triumph accessory D-lock (available from
your Triumph dealer).
Secure the lock as follows:
Thread the strap through the rear fender lock
support from the rear, so that the buckle
faces towards the rear of the motorcycle.
Position the U-section of the lock to the rear
fender support features, ensuring the open
end faces towards the rear of the motorcycle.
Position the lock body to the support on the
rear fender.
Thread the strap over the lock and through
the buckle, and pull tight, fastening the hook
and loop part of the strap to secure.
5
3
4
cgef
1. Lock U-section
2. Lock
3. Hook and loop strap
4. Rear fender lock support feature
5. Buckle
2
1
43