ADEMCO VIA-30Pse Installation Instructions Manual page 78

*
Can only be used if
Primary reporting format
is Ademco Contact ID.
If reporting to Pager,
choose from 6, 7, 8, or 9,
as desired.
Press 45 PHONE SYSTEM SELECT
If Central Station Receiver is not on WATS line:
0 = Pulse Dial, 1 = Tone Dial.
If Central Station Receiver is on WATS line:
2 = Pulse Dial, 3 = Tone Dial.
Press 46 REPORT FORMAT, PRIMARY/SECONDARY
Determines which format is to be used to report to the central
station.
0 = 3+1; 4+1 ADEMCO Lo Speed Standard (this is the default)
1 = 3+1; 4+1 Radionics Standard
2 = 4+2 ADEMCO Lo Speed Standard
3 = 4+2 Radionics Standard
6 = 4+2 ADEMCO Express
7 = ADEMCO Contact ID Reporting
8 = 3+1; 4+1 ADEMCO Lo Speed Expanded
9 = 3+1; 4+1 Radionics Expanded
(Enter as the 4th digit of
used.)
Note:
The maximum number of alarm and alarm restore reports
during one armed period is determined by field 92.
Press 47 SPLIT/DUAL REPORTING
Enter 0 to disable (Backup report only). This is the default.
TO PRIMARY PHONE No.
1 = Alarms, Restore, Cancel
2 = All except Open/Close, Test
3 = Alarms, Restore, Cancel
4 = All except Open/Close, Test
5 = All reports
TO PRIMARY PHONE #
6 = All reports except Open/Close
7 = All reports
8 = All reports
9 = All reports except Open/Close
‡ Will report only Users 5–8. If using wireless button-type devices, the zone
number of the arm or disarm button (10–25) will be sent as the user number.
Entries 6 through 9 will send a report to a pager (in addition to the selected
primary phone number), but you must enter the pager number as the
secondary phone number in field 42.
A 10-digit code is sent to the pager which will take the following format:
→
†
4-digit Subscriber No.
(as entered in field 43)
3-Digit Event Code, as follows:
911 = Alarm (NNN = Zone No.)
001 = Open, System disarmed (NNN = User No.)
002 = Close, System armed ( NNN = User No.)
811 = Trouble ( NNN = Zone No.)
† The first digit of the Subscriber No. entered in field
USE "0"); the last 3 digits can be 0–9. Failure to observe this requirement may
interfere with paging services.
15–4
Enter 1 digit (default = 0)
43 if 3+1 dialer reporting is to be
TO SECONDARY PHONE No.
Other Reports
Open/Close, Test
All reports
All reports
All reports
TO PAGING NUMBER
Alarms, Open/Close, Troubles
Alarms, Troubles
Alarms, Open/Close, Troubles
Alarms, Open/Close for User
Nos. 5–25
←
SSSS–EEE–NNN 3-digit User or Zone No.
↑
*
‡, Troubles
43 must be 1–9 (DO NOT