Yamaha DRX-2 Service Manual page 76

DRX-2
Nucleus Name
Nucleus Number
Description
Technical
Execution
User Input
Error
Example
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
76
DS_SYS_SettingsDisplay
1228
Show the settings that are programmed in the BROM on the digital board.
- Set-up IIC-bus.
- Read Digital Board Settings from boot EEPROM.
- Display the settings.
Time 1 second
None.
Number Description
122800 The settings were successfully displayed.
122801 IIC access failed.
122802 Invalid settings
DS:> 1228
Settings ID: 6D7920626F61726400020300010101020101000020080000
Board name:
Hardware ID:
Codec IC:
Video Input Processor IC:
Progressive Scan Deinterlacer IC: None
Progressive Scan Denc IC:
I-Link physical layer circuit IC:
I-Link link layer circuit IC:
Audio clock:
Bit DVDR Mechanism connector: available
IDE connector 1:
IDE connector 2:
PCI connector:
RAM size
ROM size (NOR FLASH bank 1)
ROM size (NOR FLASH bank 2)
ROM size (NAND FLASH)
Bit DVDR Mechanism:
122800:
Test OK @
DS_SYS_SettingsGet
1229
Get the digital board diversity settings string that is programmed in the BROM on the digital
board.
- Setup IIC-bus.
- Read Digital Board Settings from boot EEPROM.
- Read System Settings from boot EEPROM.
- Display the settings.
1 second
None.
Number Description
122900 The settings were successfully displayed.
122901 IIC access failed.
122902 The settings are invalid
DS:> 1229
122900: 6D7920626F61726400020300010101020101000020080000
Test OK @
my board
0
PNX7100_MF2
SAA7118
ADV7196
PDI1394P25
PDI1394P40
Clock scheme 1
available
not available
not available
32MByte
8MByte
Not available
Not available
AV 2.0