Yamaha DRX-2 Service Manual page 45

Nucleus Name DS_BE_FocusOn
Nucleus Number 913
Description Put the laser of the BE into focus
Technical - Send the FOCUS command with parameter 0x01
Execution Time 3 seconds
User Input None
Error Number
91300
91301
91302
91303
91304
91305
91306
Example DS:> 913
091300:
Test OK @
Nucleus Name DS_BE_FocusOff
Nucleus Number 914
Description Turn off putting the laser of the BE into focus
Technical - Send the FOCUS command with parameter 0x00
Execution Time Less than 1 second
User Input None
Error Number
91400
91401
91402
91403
91404
91405
91406
Example DS:> 914
091400:
Test OK @
Nucleus Name DS_BE_MotorOn
Nucleus Number 915
Description Turn on the turntable motor
Technical - Send the TURN_TABLE_MOTOR_ON command
Execution Time Less than 1 second
User Input None
Error Number
91500
91501
91502
91503
91504
91505
91506
Example DS:> 915
091500:
Test OK @
Description
Focus on succeeded
There was a time-out while communicating
The DVDR Mechanism returned an unexpected result
The BE returned an error code
No acknowledge received from BE
Communicating with the DVDR Mechanism failed
Unable to enter service mode
Description
Focus off succeeded
There was a time-out while communicating
The DVDR Mechanism returned an unexpected result
The BE returned an error code
No acknowledge received from BE
Communicating with the DVDR Mechanism failed
Unable to enter service mode
Description
Turn table motor is on
There was a time-out while communicating
The DVDR Mechanism returned an unexpected result
The BE returned an error code
No acknowledge received from BE
Communicating with the DVDR Mechanism failed
Unable to enter service mode
DRX-2
45