Table of Contents
Advertisement
Nucleus Name
DS_CHR_SineBurst
Nucleus Number
105
Description
Generate an audio sine signal on the audio output of the digital board for 4 seconds.
Note: Left channel 6kHz, right channel 12 kHz sine with some known hick-ups
Technical
-
Call the DS_CHR_SineOn nucleus
-
Delay for 4 seconds
-
Call the DS_CHR_SineOff nucleus
Execution Time
4 seconds
User Input
None
Error
Number
10500
10501
10502
Example
DS:> 105
010500:
Test OK @
Nucleus Name
DS_CHR_MuteOn
Nucleus Number
106
Description
Mute the audio outputs of the digital board
Technical
-
Send the 'Mute' command to the PALM DSP
Execution Time
Less than 1 second.
User Input
None
Error
Number
10600
Example
DS:> 106
010600:
Test OK @
Nucleus Name
DS_CHR_MuteOff
Nucleus Number
107
Description
De-mute the audio outputs of the digital board
Technical
-
Send the 'DeMute' command to the PALM DSP
Execution Time
Less than 1 second.
User Input
None
Error
Number
10700
Example
DS:> 107
010700:
Test OK @
Description
The sine signal burst was successfully generated
The delay did not succeed during the burst
The audio sine could not be generated
Description
Muting the audio succeeded
Description
De-muting the audio succeeded
DRX-2
19
Advertisement
Table of Contents
