Yamaha DRX-2 Service Manual page 50

DRX-2
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
50
DS_DCB_VersionGet
1001
Get the version of the DCB
- Issue the DCB version get command to the analog board and wait for the result
Less than 1 second.
None
Number Description
100100 Retrieving the version of the DCB succeeded
100101 The DCB could not be accessed by the analog board.
100102 There was no response from the analog board.
100103 The returned errorcode from the analog board is un-known
100104 Something went wrong with the error code.
DS:> 1001
100100: DCB version: 13
Test OK @
DS_DCB_LightDisplay
1002
Light the entire display of the DCB, and clear the display after confirmation.
User confirmation is necessary.
- First issue a command to clear the display and wait for the result
- Then issue the command to light the entire display and wait for confirmation by the user
Until user confirmation.
None
Number Description
100200 Lighting the entire display succeeded
100201 The DCB could not be accessed by the analog board.
100202 There was no response from the analog board.
100203 The returned errorcode from the analog board is un-known
100204 The DCB could not be accessed by the analog board.
100205 There was no response from the analog board.
100206 The DCB did not light all labels.
100207 The user skipped the rest of the DCB_Light_Display test.
100208 The user returned an unknown confirmation:
100209 The returned errorcode from the analog board is un-known
DS:> 1002
100200:
Test OK @