Yamaha DRX-2 Service Manual page 56

DRX-2
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
56
DS_ANAB_SoftwareVersionDiagnosticsGet
1110
Get the software version of the diagnostic software of the analog board
Send command P_DS_ANACOM_SW_VERSION_DIAG with no parameters to the analog
board and read back the result
Less than 1 second
None
Number Description
111000 Reading the diagnostics-software version succeeded
111001 The segment containing the diagnostics-software version could
not be found
111002 There was an error communicating with the analog board
111003 The analog board returned an unexpected result
DS:> 1110
111000: Diagnostics application version : 11.00.13
Test OK @
DS_ANAB_ChecksumProgram
1111
Check the checksum of the several partitions by recalculating and comparing partition
checksums
Send command P_DS_ANACOM_FLASH_CHECKSUM with no parameters to the analog
board and read back the result
Less than 5 seconds
None
Number Description
111100 Checksum calculation succeeded
111101 The FLASH was not accessible
111102 The checksum stored in FLASH is not correct
111103 There was an error communicating with the analog board
111104 The analog board returned an unexpected result
DS:> 1111
BootCode checksum is: 0xBABE6240, which is correct
Diagnostics checksum is : 0xBABEBEAD, which is correct
Download checksum is: 0xBABEA6B7, which is correct
Application checksum is : 0xBABEB277, which is correct
111100:
Test OK @