Table of Contents
Advertisement
Nucleus Name
DS_DCB_Keyboard
Nucleus Number
1004
Description
Check all keys of the keyboard by confirming the key-code displayed of each key.
Technical
-
Initialise the display
-
Display the key pressed by the user on the display
-
Monitor the service port for an abort and get the next key pressed
-
Update the display and repeat previous steps until user stops / confirms
Execution Time
Until user confirmation.
User Input
None
Error
Number
100400
100401
100402
100403
100404
Example
DS:> 1004
100400:
Test OK @
Nucleus Name
DS_DCB_RemoteControl
Nucleus Number
1005
Description
Check the interface between the remote control and the DCB by checking the key-code
displayed
Technical
-
Initialise the display
-
Display the key pressed by the user on the display
-
Monitor the service port for an abort and get the next key pressed
-
Update the display and repeat previous steps until user stops / confirms
Execution Time
Until user confirmation.
User Input
None
Error
Number
100500
100501
100502
100503
100504
Example
DS:> 1005
100500:
Test OK @
Description
All the keys on the keyboard have been pressed
DCB Keyboard; test failed
DCB Keyboard; test aborted
Not all the keys were pressed.
The DCB could not be accessed by the analog board.
Description
Remote Control test succeeded
DCB Remote control; test failed
DCB Remote control; test aborted
The DCB could not be accessed by the analog board.
DCB Remote control; no user input received
DRX-2
51
Advertisement
Table of Contents
