Maintenance Menus - FLIR M400 Operator's Manual

M400 Web Browser Interface

Maintenance Menus

After making configuration changes, click the Save button at the bottom of the page. After saving,
it is also necessary to stop and restart the server. The server has a configuration that is active and
running, and another configuration that is saved.
Scroll bar
Server Status
Figure 5-3: Maintenance Menu Pages
The message at the bottom of the page indicates the saved configuration is different than the
active (running) configuration, and it is necessary to restart the server.
Restarting the Server
Click on the green light at the lower left next to "Server Running" to stop
the server.
It may take up to 20 seconds for the server to stop, especially if multiple
video streams are open. Be patient when stopping the server.
Once the server is stopped, an information
message will pop up on the screen.
When the server is stopped and the page is
refreshed, the status will show as "Server
Stopped."
Click to restart the server. When the page
refreshes, the status will again show as "Server
Running...". The Start button will be replaced by a
Stop button when the startup procedure has
completed.
432-0012-00-10 Version 100 December 2015 40