Setup->Surveillance->Scan List; Setup->Surveillance->Auto Scan - FLIR M400 Operator's Manual

M400 Web Browser Interface
Setup->Surveillance->Scan List
Setup->Surveillance->Auto Scan
The Relative Auto Scan (Surveillance mode) can be started and the settings changed from the
OSD menu, JCU II (UPB), or the web page.
The Absolute Auto Scan can be started and the parameters set in the web page, but Absolute
Auto Scan can also be started as an option in the Startup mode when the camera boots. Refer to
"Startup Mode" on page 44.
432-0012-00-10 Version 100 December 2015
To setup Presets:
position camera,
select Preset ID
Click Set,
then Save
To start Auto Scan:
select width and speed,
then select Start
Set Autoscan at Startup:
select speed,
select limits,
click Save
38