FLIR M400 Operator's Manual page 33

M400 Web Browser Interface
Help
At the top of the page, the Help menu shows software version information. This page has
information about the camera including hardware and software revision numbers, part numbers,
and serial numbers. If it is necessary to contact FLIR Technical Support for assistance, it will be
helpful to have the information from this page (such as Software Version) on hand.
Log out
Use this button to disconnect from the camera and stop the display of the video stream. If a web
session is inactive for 20 minutes, it will be stopped.
Toggle Camera/PC time
Use this button to view either the PC time or the camera time.
Camera Control and Status
In the lower left of the screen are two indicator lights: Control and
Status. Initially the Control light is off, as in the image above,
indicating the user is not able to control the camera. When
multiple users are connected to a camera, only one user at a
time can issue commands to the camera. If another user has
control of the camera, the Control light is yellow. Request control
of the camera by clicking on the yellow or black light, or simply by
sending a command to the camera. The Status light may turn off
temporarily while waiting for the response from the camera. Be
patient, there may be a slight delay between each command
while the browser waits for a response from the camera.
In addition, when the cursor is moved over the video, there are mouse-over pan, tilt, and zoom
buttons and a mouse-over snapshot button. The zoom buttons appear in the lower left of the
screen; the snapshot button appears in the upper right of the screen. After clicking the snapshot
button, the video image is saved as a .jpg file and the browser will provide prompts depending on
which browser is being used.
Web Control Panel
The control buttons on the right side of the page provide a way to control the camera in a limited
number of ways. When the mouse cursor is positioned over a button, a tool tip is displayed.
This same web interface is used with various FLIR thermal cameras—some are fixed and some
are pan/tilt cameras. As a result, different buttons in the control panel will appear for different FLIR
cameras.
IR Control Keypad
432-0012-00-10 Version 100
Go to Preset position.
See "Setup->Surveillance->Scan
List" on page 38.
December 2015
Mouse-over Controls
Pan/Tilt
Zoom
Visible Control Keypad
33