Programming The Unit Using Conferencing Phone Manager; Restarting The Unit Using Conferencing Phone Manager - Panasonic KX-NT700 Operating Instructions Manual
Ip conferencing phone
Hide thumbs
Also See for KX-NT700:
- Operating instructions manual (80 pages) ,
- Quick reference manual (9 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Conferencing Phone Manager
Programming the Unit
Using Conferencing
Phone Manager
1.
Start Conferencing Phone Manager (see page 57).
2.
Click the icon (
) in the upper-left corner of the
front panel screen.
•
The programming screen is displayed.
3.
Click the desired programming category name on
the left side of the screen.
•
The corresponding parameters are displayed
on the right side of the screen.
4.
Change the parameters as desired.
5.
Click [OK].
•
The front panel screen is displayed again.
•
To cancel without changing any settings, click
[Cancel].
Note
•
If the unit must be restarted before the new
settings become effective, a dialog will prompt
you to restart the unit. Click [Yes] to restart the
unit.
58
Operating Instructions
Restarting the Unit Using
Conferencing Phone
Manager
1.
Click the icon (
) in the upper-left corner of the
front panel screen.
•
The programming screen is displayed.
2.
Click [Restart].
3.
Click [Restart], then click [Yes].
•
The front panel screen is displayed again.
Document Version
2008/10
Advertisement
Table of Contents
