Programming the Unit
Parameters
When programming the unit from the front panel, the current setting is indicated on the display by "ü".
Show IP Address
Description
Allows you to confirm the unit's IP address.
To change the IP address, see page 24.
Operation Mode
Description
Determines the mode used to make and receive IP calls.
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see page 43).
Basic Settings
Language
Description
Determines the display language.
Use the following procedure to change the language.
1.
Press [MENU].
2.
Press [ ] 10 times.
3.
Press [ENTER] two times.
4.
Press [ ] or [ ] repeatedly to select the desired
language.
5.
Press [ENTER].
6.
Press [MENU].
46
Operating Instructions
Available Settings
—
Available Settings
IP-PBX
Peer to Peer
Available Settings
English (US)
Español
Français
Français (C)
Italiano
Nederlands
Português
Deutsch
English (UK)
Default Setting
192.168.0.2
Default Setting
IP-PBX
Default Setting
English (US)
Document Version
2008/10