Panasonic KX-NT700 Operating Instructions Manual page 2

Introduction
Introduction
Connection to a Panasonic Pure IP-PBX (IP-PBX
Mode)
The unit can be connected to a Panasonic KX-TDE or KX-NCP series PBX and used as a SIP extension. This
allows you to make and receive calls using the outside lines and IP network connected to the PBX, call other
extensions of the PBX by dialing their extension numbers, participate in conference calls with 4 or more other
participants, etc.
PC
IP-PT
IP Softphone
SIP Extension
KX-NT700
The following features are available when the unit is used as a SIP extension. Refer to the PBX documentation
for details.
– Account Code Entry
– Automatic Route Selection (ARS)
– Conference (as a member only)
– DND Override
– Doorphone Call
– Extension Block
– Operator Call
2 Operating Instructions
DPT APT
– Personal Speed Dialing
– Redial
– S-CO Line Access
– System Speed Dialing
– TIE Line Call
– Trunk Group Access
IP Network
Outside Telephone
Lines
SLT CS PS
Document Version
Other party
of IP call
Other party
of TEL call
2008/10