Protocol Settings - Panasonic KX-NT700 Operating Instructions Manual

Programming the Unit
IP Address
Description
Determines the unit's IP address.
•
This parameter is only available when "IP Address
Mode" is set to "Static".
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see page 43).
Subnet Mask
Description
Set this parameter to match the IP address of the IP
network's subnet mask.
•
This parameter is only available when "IP Address
Mode" is set to "Static".
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see page 43).
Default Gateway
Description
Set this parameter to match the IP address of the IP
network's default gateway.
•
This parameter is only available when "IP Address
Mode" is set to "Static".
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see page 43).

Protocol Settings

Consult your system administrator for the appropriate settings.
SIP Ext. No.
Description
Set this parameter to match the extension number assigned
to the unit through PBX programming.
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see page 43).
50 Operating Instructions
Available Settings
—
Available Settings
—
Available Settings
—
Available Settings
Max. 32 digits
Default Setting
192.168.0.2
Default Setting
255.255.255.0
Default Setting
0.0.0.0
Default Setting
—
Document Version 2008/10