Installing And Uninstalling Conferencing Phone Manager - Panasonic KX-NT700 Operating Instructions Manual

Installing and
Uninstalling
Conferencing Phone
Manager
The unit can be used in conjunction with Conferencing
Phone Manager. This software can be found on the
included CD-ROM, and allows you to operate and
program the unit using a computer (see page 57).
System Requirements
Supported operating systems
–
Microsoft Windows XP (all editions)
–
Windows Vista (all editions)
Hardware requirements (when using Windows
XP)
–
CPU: 1 GHz Intel Pentium or Celeron
microprocessor (or a CPU of similar performance)
–
Hard disk: at least 1 GB of available space
–
RAM: at least 256 MB
Hardware requirements (when using Windows
Vista)
–
CPU: 1 GHz Intel Pentium or Celeron
microprocessor (or a CPU of similar performance)
–
Hard disk: at least 1 GB of available space
–
RAM: at least 512 MB
Installing Conferencing Phone
Manager
To install the software using the following procedure, do
not connect the unit to the computer using the USB
cable until step 8.
1.
Insert the included CD-ROM into the computer's CD
drive.
•
The CD-ROM's menu is displayed.
2.
Click [Conferencing Phone Manager].
3.
Click [OK].
•
The folder containing [Setup.exe] is displayed.
4.
Double-click [Setup.exe].
5.
Select the desired language, then click [OK].
•
The software install wizard is displayed.
Document Version 2008/10
6.
Follow the on-screen instructions and install the
software.
•
A dialog may be displayed that indicates the
software has not passed Windows logo testing.
This is normal. The software will not cause any
difficulties with your operating system. Click
[Continue Anyway] to proceed with
installation.
7.
Click [Finish].
•
If [Launch Conferencing Phone Manager] is
checked, Conferencing Phone Manager will
start.
8.
Connect the included USB cable to the USB port of
the unit (A) and of the computer.
A
•
The new hardware wizard is displayed.
9.
Select [Install the software automatically
(Recommended)], then click [Next].
•
A dialog may be displayed that indicates the
software has not passed Windows logo testing.
This is normal. The software will not cause any
difficulties with your operating system. Click
[Continue Anyway] to proceed with
installation.
10.
Click [Finish].
Note
•
After installation is complete, a shortcut icon
appears on the desktop.
You can click this icon to start
Conferencing Phone Manager.
Uninstalling Conferencing Phone
Manager
1.
Click [Start]®[All
Programs]®[Panasonic]®[Conferencing
Phone Manager], and click [Uninstall].
2.
Click [Yes].
3.
Click [Finish].
Preparation
USB
Operating Instructions 29