Conferencing Phone Manager; Using Conferencing Phone Manager; Operating The Unit Using Conferencing Phone Manager - Panasonic KX-NT700 Operating Instructions Manual

Using Conferencing
Phone Manager
The unit can be used in conjunction with Conferencing
Phone Manager. This software can be found on the
included CD-ROM, and allows you to operate and
program the unit using a computer.
For software installation instructions, see page 29.
Connecting a Computer
Connect the included USB cable to the USB port of the
unit (A) and of the computer.
A
Note
•
We recommend using only the included USB
cable when connecting the unit to a computer
via USB.
Starting Conferencing Phone
Manager
You can start Conferencing Phone Manager using any
of the following methods.
–
Using the shortcut icon
Double-click the Conferencing Phone Manager
shortcut icon on the desktop (created during
software installation).
–
From the [Start] menu
Click [Start]®[All
Programs]®[Panasonic]®[Conferencing
Phone Manager]®[Conferencing Phone
Manager].
Document Version 2008/10
After Conferencing Phone Manager starts, the front
panel screen is displayed.
Exiting Conferencing Phone
Manager
To exit, click the icon (
the front panel screen.
Operating the Unit Using
USB
Conferencing Phone
Manager
From the front panel screen, you can operate the unit
just as if you were using the front panel of the unit itself.
For information about using the following commonly
used features, refer to pages listed below.
•
Making calls (page 31)
•
Answering calls (page 34)
•
Adding entries to the phonebook (page 36)
For information about other features, refer to the
relevant sections in this document.

Conferencing Phone Manager

) in the upper-right corner of
Operating Instructions 57