Using The Speed Dial Function - Minolta Di151 Operator's Manual

Basic Fax Operation (1)
4. When the transmission is completed, a
buzzer sounds and the message "TX
COMPLETE" is shown for 2 sec.,
indicating that the document has been
successfully transmitted to the other party.
Then, the initial screen reappears.
To obtain detailed results of the
transmission, print the Activity Report.
➭ P 9-11

3.1.3.3.Using the Speed Dial Function

The Speed Dial function allows you to transmit a document to a particular
party by just entering a 2-digit number assigned to that party. To use this
function, however, you must first program each Speed dial NO.(2-digits)
with fax number and other data .
Up to 100 different parties can be registered for Speed Dial.(Speed dial
NO.: 00 to 99)
For more details of registering procedure, see " Dial Registration" ➭P 6-5
Example:
1. Check that the Fax screen is shown.
If not, press the Copy/Fax key to switch.
2. Place the document into the Document
Feeding Tray.
3. Press the Speed Dial key, and the display
appears the prompt.
* TX COMPLETE*
TOKYO
TEXT
JAN.01 15:38
-SET DOC. FACE UP-
SPEED DIAL=_
3-11
11
1
100%
Speed Dial