Using the Enhanced Utilities (2)
2. Press "1" of Numeric keys. Then the following
message appears briefly to confirm your
selection.
3. Press
or
MANUAL or PHOTO as default setting
and press Yes key.
4. Press No/Clear key, back to the initial state.
7.2.2 Setting AUTO DENSITY
Set density level of Automatic density adjustment.
1. Press the Utility key 2 times, then the message
"COPY SETTING" appears.
2. Press "2" of Numeric keys. Then the
following message appears briefly to
confirm your selection.
3. Press
or
density as default setting and press Yes
key.
4. Press No/Clear key, back to the initial state.
key to select AUTO,
key to select the desired
7-13
1
1 DENSITY/PHOTO
* AUTO MANUAL PHOTO
,
& YES
Yes
No
C
Utility
COPY SETTING?
OK=YES / or 1-6
ABC
2
2 AUTO DENSITY
LIGHT
DARK
,
& YES
Yes
No
C
x 2