Relay Broadcast Report; Print A Report; Automatic Print The Report (Setting By Utility Key) - Minolta Di151 Operator's Manual

Printing Reports

9.2 Print a Report

A report could be automatically printed when the condition is met, or manually printed
at any time you need.

9.2.1 Automatic Print the report (Setting by Utility key)

The following reports can be set to Auto printing or Manual printing by Utility
function. When the Auto-Printing is set to ON, the report is printed automatically
when printing conditions are met; when the auto printing is set to OFF, you must use
the Confirm utilities to print the desired report.
Report Name
Activity Report
Reservation Report
TX Result Report
RX Result Report
NOTE: There is no need to set auto printing for following reports that are
automatically printing when printing conditions are met.
Report Name

Relay Broadcast Report

Lost Report
Backup RAM Error
Description
Prints a list of results of the last 60 communications.
Prints a list of the contents of reservations of
Broadcast transmission and multi-polling
reception.
Prints a list of the result of a transmission after it
has been completed.
Prints out a list of the results when receiving a
confidential or multi-polling document, or when
errors occur during reception.
Description
After relay broadcast, machine will make a
schedule to transmit the report.
Prints a list of documents whose data has been
lost that was received in memory
Before turning OFF the power, prints out a list of
the SET utilities, etc., which were not stored in
Report
the Backup RAM because of memory error.
9-20