Table of Contents
Advertisement
Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive bracket.
Description
2-TB, 5400-rpm, 2.5-inch
1-TB, 5400-rpm, 2.5-inch, hybrid 8 GB SSD
1-TB, 5400-rpm, 2.5-in
750 GB, 5400 rpm, 2.5 in
500-GB, 5400-rpm, 7 mm, hybrid 8 GB SSD
Hard Drive Hardware Kit (brackets and connector)
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive (see
6.
Remove the bottom cover (see
To remove the hard drive:
1.
Disconnect the hard drive cable from the system board (1).
36
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
27).
Optical drive on page
Bottom cover on page
28).
32).
Spare part number
801808-005
731999-005
778192-005
778190-005
778186-005
809296-001
Advertisement
Table of Contents
