Table of Contents
Advertisement
Use the
●
To save your changes and exit Computer Setup menus:
Click the Save icon in the lower-right corner of the screen, and then follow the on-screen instructions.
– or –
Use the
Your changes go into effect when the computer restarts.
Restoring default settings in Computer Setup
NOTE:
Restoring defaults will not change the hard drive mode.
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
2.
Press
3.
Use a pointing device or the arrow keys to select File > Restore Defaults.
4.
Follow the on-screen instructions.
5.
To save your changes and exit, click the Save icon in the lower-right corner of the screen, and then
follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.
NOTE:
Your password settings and security settings are not changed when you restore the default settings.
76
Chapter 8 Computer Setup (BIOS), MultiBoot, and System Diagnostics – Windows 8
tab
key and the arrow keys to select File > Ignore Changes and Exit, and then press enter.
tab
key and the arrow keys to select File > Save Changes and Exit, and then press enter.
f10
to enter Computer Setup.
esc
while the "Press the ESC key for Startup Menu"
Advertisement
Table of Contents
