Table of Contents
Advertisement
Power button board
Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive (see
6.
Remove the bottom cover (see
7.
Remove the system board (see
To remove the power button board:
1.
Disconnect the calbe (1).
2.
Remove the Phillips PM2.0×2.5 screw (2) that secures the power button board to the computer.
3.
Remove the power button board from the computer (3).
Reverse this procedure to install the power button board and cable.
Battery on page
27).
Optical drive on page
Bottom cover on page
System board on page
28).
32).
48).
Component replacement procedures
Spare part number
809310-001
53
Advertisement
Table of Contents
