Table of Contents
Advertisement
4.
Remove the fan from the computer (3).
Reverse this procedure to install the fan.
Heat sink assembly
NOTE:
The heat sink assembly spare part kit includes replacement thermal materials.
Description
For use in models with UMA graphics AMD Radeon R5
For use in models with discrete AMD Radeon R7 M360 (Meso-XT) graphics
For use in models with UMA AMD Radeon R6 graphics
For use in models with discrete graphics
NOTE:
To properly ventilate the computer, allow at least 7.6 cm (3.0 in) of clearance on the left side of the
computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and
is designed to turn on automatically when high temperature conditions exist. These conditions are affected by
high external temperatures, system power consumption, power management/battery conservation
configurations, battery fast charging, and software requirements. Exhaust air is displaced through the
ventilation grill located on the left side of the computer.
Before removing the heat sink assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
Spare part number
806759-001
806760-001
809104-001
809105-001
Component replacement procedures
43
Advertisement
Table of Contents
