Brother Operating Instructions Basic User's Manual page 124

Level 1 Level 2
Wi-Fi Direct
Network
(continued)
(continued)
See Network User's Guide.
Visit the Brother Solutions Center to download the Wi-Fi Direct™ Guide at http://support.brother.com.
Visit the Brother Solutions Center to download the Web Connect Guide at http://support.brother.com.
The factory settings are shown in Bold with an asterisk.
112
Level 3 Level 4
—
PIN Code
—
Manual
—
Group Owner
Device Device Name
Information
SSID
IP Address
Status Status
Information
Signal
Level 5 Options
— —
— —
—
On
Off*
— —
— —
— —
—
G/O Active(**)
Client Active
Not Connected
Off
** = the number
of devices
—
Strong
Medium
Weak
None
Descriptions
You can easily
configure your
Wi-Fi Direct™
network settings
using WPS with a
PIN code.
You can manually
configure your
Wi-Fi Direct™
network settings.
Sets your machine
as the Group
Owner.
You can see the
device name of
your machine.
Shows the SSID of
the Group Owner.
When the machine
is not connected,
Touchscreen
shows
Not Connected.
You can see the
current IP Address
of your machine.
You can see the
current Wi-Fi
Direct™ network
status.
You can see the
current Wi-Fi
Direct™ network
signal strength.
When your machine
acts as the Group
Owner, the
Touchscreen
always shows
Strong.