Unscrewing The Thumbscrews And Sliding The System Board - HP ProLiant DL585 Maintenance And Service Manual

Removal and Replacement Procedures
14. Remove the lower foam air baffle.
15. Unscrew the system board thumbscrews. It may be necessary to use the Torx tool located
on the back of the server.
16. Slide the system board toward the front of the unit.
Figure 2-37: Unscrewing the thumbscrews and sliding the system
board
IMPORTANT: When handling the system board, place your hands only on the two handles.
2-44 HP ProLiant DL585 Server Maintenance and Service Guide