Front Bezel; Removing The Exterior And Interior Chassis Screws - HP ProLiant DL585 Maintenance And Service Manual

Hide thumbs Also See for ProLiant DL585:
Table of Contents

Advertisement

Front Bezel

To remove the front bezel:
1. Power down the server. Refer to "Powering Down the Server" ea rlier in this chapter.
2. Extend the server from the rack. Refer to "Extending the Server from the Rack" earlier in
this chapter.
3. Remove the access panel. Refer to "R emoving the Access Panel" earlier in this chapter.
4. Using the T-15 Torx tool, remove the six screws on the exterior of the chassis (1) and the
two screws on the interior of the chassis next to the universal media drive bays (2).
Figure 2-23: Removing the exterior and interior chassis screws
HP ProLiant DL585 Server Maintenance and Service Guide
Removal and Replacement Procedures
2-27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents