HP ProLiant DL585 Maintenance And Service Manual page 72

Diagnostic Tools
Table 3-1: Diagnostic Tools
Tool
Integrated Lights-Out (iLO)
Survey Utility
Integrated Management Log (IML)
ROM-Based Setup Utility (RBSU)
ROMPaq Utility
3-2
Description
iLO is a remote management port
that can be accessed through a
dedicated Lights-Out port on the rear
panel of the server. Accessed
through a standard browser from
anywhere, the iLO capabilities will
not require any unique software
applications to use.
Survey Utility gathers critical
hardware and software information
on servers running Microsoft
Windows, or Linux operating
systems.
If a significant change occurs
between data-gathering intervals,
the survey utility marks the previous
information and overwrites the
survey text files to reflect the latest
changes in the configuration.
The IML is a log of system events
such as system failures or nonfatal
error conditions. View events in the
IML from within:
•
Insight Manager 7
•
Survey Utility
•
Operating system-specific IML
utilities
RBSU configures the hardware
installed in or connected to the
server. Specifically, it can:
•
Store configuration information
in nonvolatile memory
•
Manage memory installation,
processor upgrades, network
interface cards and mass
storage devices
•
Assist in installing an operating
system
•
Configure ports and IRQs, if
required
The ROMPaq Utility checks the
system and provides a choice of
available ROM revisions and
controller firmware.
HP ProLiant DL585 Server Maintenance and Service Guide
How to run the tool
For more information on iLO, refer to
the Integrated Lights-Out User Guide
on the Documentation CD.
Install the Survey Utility from the
SmartStart CD, the Integration
Maintenance Utility, or the
Management CD.
The IML requires HP operating
system management drivers. Refer
to the SmartStart CD for instructions
on installing the appropriate drivers.
Run RBSU by pressing the F9 key
during POST.
Run this utility from the SmartStart
CD included with the server.