User settings
The following table displays the options that can be changed by the user.
10
Installation and User's Guide
Main menu
Submenu
Settings
Local settings
In/Out settings
On/Off settings
Battery settings
Event log
Event filter
Event list
Reset event list
Fault log
Fault list
Reset fault list
Identification
Register product
Submenu
Local settings
Language
Date/time
LCD
Audible alarm
Function
Sets product general parameters
Sets Output parameters
Sets On/Off conditions
Sets battery configuration
Selects faults, alarms and/or events to
display
Displays the stored events
Clears all stored events
Displays the stored faults
Clears all stored faults
Displays [Product type/model] /
[Part/Serial number] / [UPS/NMC
firmware] / [Com card IPv4], [Com card
IPv6], [Com card MAC] / [Detected
accessories]
Link to Lenovo website
Available settings
Default settings
[language_name]
[English]
Select the desired
language from the
list. Menus, status,
notices and alarms,
UPS fault, Event Log
data and settings are
in all supported
languages.
[International]
Format:
[International] [US]
Modify LCD screen
brightness and
contrast to be
adapted to room
light conditions.
[Enabled]
[Enabled] [Disabled
on battery] [Always
disabled]
Enable or disable the
buzzer if an alarm
occurs.