Lcd Description - Lenovo RT8.0kVA Installation And User Manual

6u rack or tower ups
Hide thumbs Also See for RT8.0kVA:
Table of Contents

Advertisement

LCD description

After 5 minutes of inactivity, the LCD displays the screen saver.
The LCD backlight automatically dims after 10 minutes of inactivity. Press any
button to restore the screen.
The following table describes the status information provided by the UPS.
Note: If any other indicator displays, see Chapter 8, "Troubleshooting," on page 55
for additional information.
8
Installation and User's Guide
Indicator
Red
Operation
status
Cause
Standby mode The UPS output is Off.
Online mode
The UPS is operating
normally.
Battery mode
A utility power failure has
occurred and the UPS is in
Battery mode.
1 beep every
10 seconds
Status
On
Description
Equipment is not powered
until
button is pressed.
The UPS is powering and
protecting the equipment.
The UPS is powering the
equipment with battery
power. Prepare your
equipment for shutdown.
Description
The UPS has an active alarm
or fault. See Chapter 8,
"Troubleshooting," on page
55 for additional information.
Is Battery
Being
Charged?
Yes
Yes
No

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rt11.0va

Table of Contents