Getting started
Battery installation and charging
Battery installation
Install the battery, as shown below.
1.
Plug the battery
connector securely
into the socket inside
the handset battery
compartment, matching
the color-coded label.
CHARGE light
TONE
4.
Charge the handset by placing it
face up in the telephone base or
charger. The CHARGE light is on
when charging.
ImPoRTAnT InFoRmATIon:
Use only the supplied rechargeable battery or replacement battery (model BT162342/
BT262342). To order, visit our website at
1 (800) 222-3111
2.
Insert the supplied
battery with the label
THIS SIDE UP facing
up, as indicated.
TONE
www.telephones.att.com
1 (866) 288-4268
. In Canada, dial
3.
To replace the battery, press
the tab and slide the battery
compartment cover downwards.
Lift out the old battery and
disconnect it from the handset.
Follow the instructions to install
and charge the new battery.
7
Align the cover flat
against the battery
compartment, then
slide it upwards until
it clicks into place.
or call
.