Table of Contents
Advertisement
USER SETUP
Admin Password
Manage the password for the Administrator account.
1. Type a new Administrator Password, and then type again to confirm the password.
2. Click Save.
Add User
The user name and passwords are limited to 16 characters with no spaces permitted. There is a
maximum of twenty user accounts.
1. Type the new Username and Password.
2. Select I/O Access, Camera Control, Talk, and/or Listen as permissions for the User.
I/O Access – All functions in the Setup and Advanced menus are available to the User.
Camera Control– Allows the User to change camera controls in the Setup menu.
Talk – Allow the user to speak through the camera microphone.
Listen – Allow the user to listen to audio captured by the camera.
3. Click Add.
Delete User
1. Select the user name on the User Name list.
2. Click Delete to remove the user.
3. Click OK in the confirmation window.
There is a momentary wait time while the Network Camera Manager saves parameters. When
this period is complete, the User will be deleted.
Modify User
1. Select the user name on the User Name list.
2. Click Edit.
3. In the resulting window, modify the Password and/or feature permissions.
4. Click Save.
Note
FILE LOCATION
33506AA
For security reasons, every time the user properties are opened the access check boxes are
automatically cleared. Make sure you select any user access options each time you edit the
user properties.
37
Advertisement
Table of Contents
