Table of Contents
Advertisement
MOTION DETECTION
Use the Motion Detection menu to configure the motion detection window(s). Here, Motion
Detection can be turned On or Off, and other general settings can be specified.
1. Use the Motion Detection dropdown to select a motion detection preset (1-4). If
choosing an additional preset after 1, check the On checkbox.
A motion detection preset can be turned Off at a later time.
Note
2. If desired, check the By Schedule check box and
use the dropdown menu to select a schedule.
3. Designate the Motion Detection Setting values.
4. Check the appropriate boxes to designate the
Trigger Action.
5. Click Save.
Add Detection Window
1. Use the Motion Detection dropdown to select a motion detection preset.
2. Click Add.
The selected motion detection square will be red.
Note
3. Arrange and size the motion detection window as desired.
4. Click Save.
Delete Motion Detection Window
1. Click to select the desired motion detection window.
2. Click Delete.
Motion Window
The motion window displays a red line and a dynamic blue
line. The red line represents the Detection Level. The blue
line will also be present if motion is present in the camera
frame. The blue line will react accordingly based on the
motion in the camera frame.
40
Advertisement
Table of Contents
