SETUP
The Setup menu includes System Settings, Picture Setup, and Streaming Settings.
The Setup menu displays limited setup options. For a complete list of setup options, see the
Note
Advanced section.
SYSTEM SETTING
CAMERA NAME
Host Name – The Host Name is used to identify the camera on your system. If camera based
Motion Detection is enabled and is set to send alarm message by Mail/FTP, the host name
entered here will display in the alarm message.
Time Zone – Select your time zone.
Time Format – Select your desired time format.
Sync With Computer Time – Select to synchronize the camera date and time with the
connected recorder.
Sync with NTP Server – Manual allows you to define the date and time manually. Network Time
Protocol (NTP) is an alternate way to synchronize your camera's clock with a NTP server. Specify
the server you wish to synchronize in the NTP Server box. Then select an Update Interval. For
more information about NTP, visit www.ntp.org.
34