IPv6 Address Configuration
To enable IPv6 select Enable IPv6 and click Save. See your network administrator if you
are unsure of your network configuration.
User Setup
Admin Password
Manage the password for the Administrator account.
To change the administrator password:
1.
Type a new Administrator Password, and then type again to confirm the
password.
2.
Click Save.
Add User
The user name and passwords are limited to 16 characters with no spaces permitted.
There is a maximum of twenty user accounts.
1.
Type the new Username and Password.
2.
Select I/O Access, Camera Control, Talk, and/or Listen as permissions for the
User.
I/O Access – All functions in the Setup and Advanced menus are available to the
User.
Camera Control– Allows the User to change camera controls in the Setup
menu.
Talk – Allow the user to speak through the camera microphone.
Listen – Allow the user to listen to audio captured by the camera.
3.
Click Add.
Delete User
1.
Select the user name on the User Name list.
2.
Click Delete to remove the user.
3.
Click OK in the confirmation window.
There is a momentary wait time while the Network Camera Manager saves parameters.
When this period is complete, the User will be deleted.
Modify User
32700AD
29