MAINTENANCE
On the Maintenance page you can export the cameras current configuration, or import the
configuration for a camera. Use the factory default page to reset the IP Camera to factory default
settings if necessary.
Note
Configuration
Export Configuration
1. Check the appropriate boxes for information that you want exported.
2. Click Export Configurations.
3. The .bin file will be saved.
Note
Upload (Import) Configuration
1. Click Browse in the Configuration Import box.
2. Select a .bin file that you want to import.
3. Click Import.
4. Click Yes when prompted that the import will cause a system reboot.
Factory Default
There are two factory default settings available: Full Restore that restores default settings
including network settings, and a Partial Restore that restores default settings excluding network
settings. A system reboot is also available; this preserves all settings.
Note
33506AA
Do not import configuration files from different models of cameras.
The default location for exported configurations is C:\
If a Full Factory Default is used, you will need to use the Network Camera Manger to find the
desired camera(s) again.
55