INSTALLATION SCENARIOS
CEILING MOUNTING WITH POLE
The ceiling mount pole is available in two lengths: 25 cm and 30 cm.
Note
Items Needed
IKS-WP8103 / IKS-WP8203R IP
•
Dome Camera
• Ceiling Pole Accessory
• Waterproof Gasket (supplied)
Screws and Anchors for the
•
mounting surface (not supplied)
1. Cut a cable access hole in the ceiling.
2. Attach the ceiling pole to the ceiling with the appropriate screws and screw anchors
(not provided).
3. Attach the waterproof gasket to the Ceiling Pole.
4. Thread the cables through the ceiling pole and the top holder.
Note
5. Attach the top holder to the ceiling pole with the supplied screws and washers and
adjust the gasket to the junction of the ceiling pole and the
top holder.
6. Connect the cables to the dome camera.
7. Attach the dome to the top holder and secure them with
the supplied screw.
33506AA
Ensure that the ceiling can support the weight of the dome camera and the ceiling pole.
After threading the cables through the tube, block the cable entry hole with the supplied
sponges to prevent insects from entering the tube.
Tools Needed
• Drill
• Screwdriver
23